Profile rail and cable duct cutters
Exhibitor
ALFRA GmbH
Switch cabinet builders are meticulous. To ensure that the millimetre-precise work on profile rails or wiring ducts is as accurate as it is convenient, our cutters are always the right choice
Cut and perforate rails of almost all profiles burr-free with virtually no waste
Low cutting clearance due to double rail guide
Clean and safe cuts in wiring ducts
Even with halogen-free models
Cutting devices from Alfra: Made for panelbuilders!
ALFRA cable ducting cutting device – VKS 125: The VKS 125 can do one thing above all - cut cable ducts with millimetre precision and without burrs. At the heart of the device is a blade made of hardened tool steel that effortlessly cuts wiring ducts and covers up to 125 millimetres wide - without noise, plastic chips or sharp edges. This eliminates the risk of chafing cables in the duct. Because the blade is fixed, cuts at an exact 90 degree angle are no problem - even with halogen-free cable ducts.
Alfra profile rail cutting device® – PSG 5+®: The PSG 5+® not only cuts mounting rails with the dimensions 35mm/7.5; 35mm/15, 15mm/5.5; but also copper earthing rails with the dimensions 10 mm X 3 mm and C-profiles 3415. It is also possible to cut G-profiles to length in accordance with EN 60715. Hole punches and dies for round, oblong and cross holes provide the 'plus'.